Software Updates

IMG_8633_6

On this page you will find the software editor, panel PC and firmware  versions and installation files. Please note that you must download a complete software package (i.e. the current released software package is Panel PC version 1.56, Firmware version H15S47, Scenario Editor version 1.833).

Please note that some combinations of the different versions are invalid and unsupported. It is therefore BioCEP’s recommendation that you always download and install a full package.

The following is a list of BioCEP software packages available for download:

  • Panel PC version 1.56 (updated version will be uploaded soon)
  • Firmware H15S47 (updated version will be uploaded soon)
  • Scenario Editor version 1.833 (updated version will be uploaded soon)

Following software package download please follow the following installation procedure:

Scenario Editor Installation (on Windows PC or Laptop):

  1. Login to the currently installed Scenario Editor and export all scenarios to a temporary file.
  2. Delete the folder c:/biocep on your hard drive.
  3. Run Setup.exe from the installation package.
  4. Login and import the scenarios and users from the temporary file created in step 1. Make sure all scenarios and users have been transferred.

 

Please follow the following instructions for CEPir Panel PC software updating:

  1. Copy the Pane PC version (.zip file) from the installation package to a USB memory stick and insert the memory stick in one of the Panel PC USB slots.
  2. On the Panel PC login with Administrator level user credentials.
  3. Select Administration–>CEP Upgrade.
  4. Select Hard Disk 2 and the file (.zip) copied in step 1.
  5. Press “OK”.
  6. The Panel PC will load the new version and reboot with it. All users and scenarios installed will be preserved by the new version.

 

Please follow the following instructions for CEPir Firmware updating:

  1. Copy the Firmware version (.rbf file) from the installation package to a USB memory stick and insert the memory stick in one of the Panel PC USB slots.
  2. On the Panel PC login with Administrator level user credentials.
  3. Select Administration–>CEP Hardware –>Add HW Image.
  4. Select Hard Disk 2 and the file (.rbf) copied in step 1.
  5. Press “OK”.
  6. The Panel PC will load the new version and display it in the list of available firmware versions. Press “Done”.
  7. The Panel PC will automatically detect the new firmware version and perform an update.

 

Notes:

  • You can immediately continue working. All upgrades are performed on-line.
  • Pumps calibration may be invalidated depending on the specific Panel PC version being upgraded. If so, please recalibrate them.
  • The changes are automatically saved. The next time you power on the CEPir , it will come up with the new versions.

If you need any assistance please contact our customer support staff and we will be happy to assist you.

 

Back to Download Center